TT 德国.精工高定淋浴房

qr
qr

10

2023

-

05

Grashlen|The reason why the shower room is not capped

At present, whether it is a straight line, a diamond type, or a curved shower room, it will not be designed to cap. Presumably, everyone doesn't know why this is designed? The ceiling shower room can better lock the heat in a fixed space, so that the insulation effect is not better? Grashlen and everyone talk about the reasons why the shower room is not capped: If the shower room


Author:

At present, whether it is a straight line, a diamond type, or a curved shower room, it will not be designed to cap. Presumably, everyone doesn't know why this is designed? The ceiling shower room can better lock the heat in a fixed space, so that the insulation effect is not better? Grashlen and everyone talk about the reasons why the shower room is not capped: If the shower room is a completely sealed space, the water vapor generated during the shower cannot be dissipated, and it is easy to form a "high concentration of steam" shower space, and long-term exposure to such an environment will cause adverse reactions such as chest tightness and poor breathing. Especially the elderly, more attention should be paid to.
In fact, the uncapped design allows the water vapor to dissipate slowly rather than collect completely. This can not only ensure the leakage of warm water vapor in the shower room, so that the heat will not be lost quickly, but also ensure good ventilation, and avoid dizziness and difficulty breathing caused by too long bathing time, high temperature and humidity.
Secondly, the design of the cap not only affects the aesthetics, but also increases the total price. Because of the fully enclosed design, it is necessary to install exhaust equipment to maintain air ventilation and convection. But this will inevitably affect the overall visual effect of the shower room.
The most important function of the shower room is to realize the partition of the bathroom, create a relatively independent bathing space, prevent splashing during the bath, and achieve the effect of dry and wet separation, so as to ensure the cleanliness and tidiness of the bathroom, and prevent the growth of bacteria and ensure the health of the family. In fact, under normal circumstances, the height of the shower room is between 1.85 meters and 2 meters, which can meet the needs of partitions, so there is no need to do capping treatment.
Of course, if you want to create a better partition effect, in addition to the height, the glass edge, stone foundation and other details of the shower room must also be sealed to better ensure that the water flow will not overflow and achieve a real "dry and wet separation" The

In this way, even if the shower room is not roofed, it can prevent water vapor leakage and ensure good ventilation.

Key words: